Publicité
HOW DO I USE MY E-COLLAR?
1. Check E-collar settings to ensure they are appropriate for your dog.
2. Ensure your E-Collar is fitted correctly.
3. Begin with Tone or Vibration, then a very low Stimulation setting, gradually
increasing until you find a level that works for you.
STEP 1. CHARGE THE REMOTE AND COLLAR
1. Please use the supplied charging cable to charge.
2. Once the collar is fully charged, its red LED Light will turn green.
3. In order to avoid leakage, squeeze the Rubber Cap of charging port.
Signs you need to charge the device:
1. The LED indicator on the collar is red and flashing rapidly.
2. The battery indicator on the remote's screen is flashing.
3. The LED light on either the collar or remote doesn't turn on.
4. The LED light on either the collar or remote blinks but doesn't turn on when you
press any of the mode buttons.
STEP 2. SET UP THE COLLAR
1. Please choose the right Contact Points that fits your dog.
2. Please remove the Metal Extension Contact if your dog's hair is very short.
3. Please use the Test Light to tighten the contact points, then put on the Silicone
Caps to protect your dog effectively.
How to Select Contact Points and Contact Spring Sheet?
For the best results, it's important to select suitable contact points based on the
thickness of your dog's coat.
You can use the contact points separately or together with the spring sheet.
4
Test all button functions before placing the collar on your dog.
Use the following output: DC 5V 0.5-2A, Don't use chargers that
don't meet necessary specifications to charge.
Publicité
