Publicité
V1.1
INTRODUCTION
The Motorcycle Wheel Chock securely supports your motorcycle in an upright
position with a locking cradle. The chock adjusts to accommodate a front or
rear tire diameter of 16 to 19 in.
SAFETY
WARNING! Read and understand all instructions before using this tool. The
operator must follow basic precautions to reduce the risk of personal injury
and/or damage to the equipment.
Keep this manual for safety warnings, precautions, operating or inspection and
maintenance instructions.
WORK AREA
1.
Operate in a safe work environment. Keep your work area clean, well-lit
and free of distractions.
2.
Keep anyone not wearing the appropriate safety equipment away from the
work area.
3.
Store unused tools properly in a safe and dry location to prevent rust or
damage. Lock tools away and keep out of the reach of children.
PERSONAL SAFETY
WARNING! Wear personal protective equipment approved by the Canadian
Standards Association (CSA) or American National Standards Institute (ANSI).
PERSONAL PROTECTIVE EQUIPMENT
1.
Always wear impact safety goggles that provide front and side protection
for the eyes. Eye protection equipment should comply with CSA Z94.3-07
or ANSI Z87.1 standards based on the type of work performed.
2.
Wear gloves that provide protection based on the work materials or to
reduce the effects of tool vibration.
3.
Wear protective clothing designed for the work environment and tool.
4.
Non-skid footwear is recommended to maintain footing and balance in the
work environment.
PERSONAL PRECAUTIONS
Control the tool, personal movement and the work environment to avoid
personal injury or damage to tool.
Visit www.princessauto.com for more information
Motorcycle Wheel Chock
8879751
3
Publicité
