Cleaning And Maintenance; Technical Specifications - HQ Power VDL15UV Mode D'emploi


Make sure there is no flammable material within a 50 cm radius of the device.

Have a qualified electrician carry out the electric connection.

Connect the device to the mains with the power plug. Do not connect it to a dimming pack.

The installation has to be approved by an expert before the device is taken into service.
5. Operation
Switch the device on and off by means of the power switch either on the device itself or on the power
cable. The UV lamp needs 3 to 4 minutes warm-up time before it reaches its maximum light output.
6.

Cleaning and Maintenance


All screws should be tightened and free of corrosion.

The housing, the lenses, the mounting supports and the installation location (e.g. ceiling, suspension,
trussing) should not be deformed, modified or tampered with e.g. do not drill extra holes in mounting
supports, do not change the location of the connections ...

Mechanically moving parts must not show any signs of wear and tear.

The electric power supply cables must not show any damage. Have a qualified technician maintain
the device.

Disconnect the device from the mains prior to maintenance activities.

Wipe the device regularly with a moist, lint-free cloth. Do not use alcohol or solvents.

There are no user-serviceable parts, apart from the lamp (see "4. Installation").

Contact your dealer for spare parts if necessary.
7.

Technical Specifications

power supply ........................................................................................ 230 V~, 50 Hz
wavelength ................................................................................................ 365 nm
VDL15UV, VDL15UVB, VDL15UVY
dimensions ................................................................................ 500 x 110 x 60 mm
weight ......................................................................................................... 1.2 kg
replacement lamp................................................................ ESL06 (15 W, 45 cm, incl.)
VDL20UV
dimensions ................................................................................ 620 x 100 x 40 mm
weight ......................................................................................................... 1.3 kg
replacement lamp................................................................ ESL07 (18 W, 60 cm, incl.)
VDL40UV
dimensions .............................................................................. 1250 x 145 x 60 mm
weight ......................................................................................................... 3.1 kg
replacement lamp................................................. LAMP40TBL/PH (36 W, 120 cm, incl.)
Use this device with original accessories only. Velleman nv cannot be held responsible in the
event of damage or injury resulting from (incorrect) use of this device. For more info
concerning this product and the latest version of this manual, please visit our website
www.hqpower.eu. The information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights reserved. No part
of this manual may be copied, reproduced, translated or reduced to any electronic medium or otherwise
without the prior written consent of the copyright holder.
V. 05 – 12/01/2017
VDLxxUVx
4 ©Velleman nv