Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
GB - ENGLISH
Operating Instructions
Dear Customer,
Many thanks for the confidence you have shown in us with the purchase of your new JET-machine. This manual has been
prepared for the owner and operators of a JET JWL-2035-M and JWL-2020-M wood lathe to promote safety during installation,
operation and maintenance procedures. Please read and understand the information contained in these operating instructions an d
the accompanying documents. To obtain maximum life and efficiency from your machine, and to use the machine safely, read this
manual thoroughly and follow instructions carefully.
...Table of Contents
2. JET Warranty
Machine description
Changing spindle speeds
Headstock rotation
Pulley drive lubrication
1. Declaration of conformity
On our own responsibility we hereby declare that this product
complies with the regulations* listed on page 2. Designed in
consideration with the standards**.
2. JET Group Warranty
The JET Group makes every effort to assure that its products
meet high quality and durability standards and warrants to the
original retail consumer/purchaser of our products that each
product be free from defects in materials and workmanship as
follows:
2 YEAR LIMITED WARRANTY ON ALL PRODUCTS
UNLESS SPECIFIED OTHERWISE.
This Warranty does not apply to defects due to directly or
indirectly misuse, abuse, negligence or accidents, normal
wear-and-tear, repair or alterations outside our facilities, or to
a lack of maintenance.
The JET group limits all implied warranties to the period
specified above, from the date the product was purchased at
retail.
To take advantage of this warranty, the product or part must
be returned for examination, postage prepaid, to an
authorized repair station designated by our office.
Proof of purchase date and an explanation of the complaint
must accompany the merchandise.
If our inspection discloses a defect, we will either repair or
replace the product, or refund the purchase price if we cannot
readily and quickly provide a repair or replacement, if you are
willing to accept a refund.
We will return repaired product or replacement at JET'S
expense, but if it is determined there is no defect, or that the
defect resulted from causes not within the scope of JET'S
warranty, then the user must bear the cost of storing and
returning the product.
The JET Group reserves the right to make alterations to
parts, fittings, and accessory equipment which they may
deem necessary for any reason whatsoever.
3. Safety
3.1 Authorized use
This wood lathe is designed for turning wood only. Machining
of other materials is not permitted and may be carried out in
specific cases only after consulting with the manufacturer.
The workpiece must allow to safely be loaded and supported.
The proper use also includes compliance with the operating
and maintenance instructions given in this manual.
Publicité
Chapitres
Table des Matières
