Publicité
SETUP
SETUP BY CODE
If the brand of your device is not listed in the SimpleSet feature, you
can set up by trying codes individually. To do this firstly locate your
brand in the Code List. Codes are listed by brand and device, and in
order of popularity.
Turn on your device (not on standby) and point the Essence
1.
remote towards it.
2.
3.
4.
The LED will blink twice on the last digit of the code.
5.
6.
If the device turns off your remote is ready to use. If not, repeat
7.
steps 2-6 with the next code in the list.
* Note: If your original remote did not have a Power key, try testing
with a different key at step 6. For example try pressing Play or Pause
when setting up a streaming box and see if the box responds.
Press the Device key you wish to set up (for
example TV).
Hold down the Setup key until the LED under the
Device key blinks twice.
Enter the first 4 digit code listed for your brand
(e.g. 1840 for LG).
Now aim the remote towards your device and press
the Power key.*
5
Publicité
