Publicité
LOWER THE TEMPERATURE AFTER USE OF THE STEAM JET
Steam requires a higher temperature respect to coffee. To prepare a coffee (or dispense hot water) after
dispensing steam, lower the temperature and return the thermometer to the green area.
- Press one of the coffee preparation buttons (9 -
that the appliance is cooling, and then they stay on when the appliance is ready.
- To make the temperature go down more fastly, you have to release some steam.
- Direct the steam erogation tube (5) in an empty container, then rotate knob (3) anti-clockwise: water
mixed with steam will be released.
- When the lights of buttons stop flashing and remain steady, the temperature has dropped sufficiently and
the machine is ready to make coffee. Stop the steam by turning the knob to "0".
DISPENSE HOT WATER
- Switch on the machine in coffee dispensing mode (with thermometer in green zone).
CAUTION, Risk of burning: during hot water erogation, do not direct the jet towards yourself or
towards other people. Only handle the tube by the rubber part: do not touch metal parts.
- Direct the steam erogation tube (5) in a cup, then rotate knob (3) anti-clockwise: hot water is released.
When the desired amount of water has been obtained, stop steam jet rotating back the knob "0".
EMPTY CONTAINER AND EVENTUAL PUMP BLOCK
Please avoid to finish water in the container, but in case it happens:
- When the water runs out, the machine makes a loud and unusual noise. Turn off immediately and pour
water in the tank. At the next restart, the pump may not load the water correctly. To help fill the water it is
recommended to dispense hot water from the tube (5).
- Direct the steam erogation tube (5) in a cup, then rotate knob (3) anti-clockwise water or steam is
released. Stop steam jet rotating back the knob "0".
FUNCTIONS STAND-BY, AUTO-OFF, OFF
To limit energy consumption when not in use, this machine has 3 functions.
Function Stand-by: for 30 minutes from the last use, the machine remains in stand-by and keeps the water at
the right temperature, ready to make coffee.
Function Auto-Off: 30 minutes after the last use, the machine turns off automatically. To make a coffee,
press one of the coffee preparation buttons (9 -
the appliance is heating, and then they stay on when the appliance is ready.
Function OFF: he machine can be turned off at any time by pressing the main switch (7).
CLEANING -
Unplug the power cord from the electrical outlet and allow the unit to cool down
before cleaning. Do not wash parts of the appliance in the dishwasher.
The machine must be cleaned regularly and daily, to keep it efficient and to extend the life of the appliance.
Clean the fixed parts of housing (6) with a soft damp cloth. Do not immerse the main body in water. In any
case, avoid splashing water or other liquids from reaching those parts. Periodically clean the tank (2) and the
lid (1) with a soft sponge and dish detergent. Rinse and dry well before reassembling them.
Remember to empty the container (16) at least once a week. There is also a floater (14): if the floater comes
out of the grid (15), the tray is too full and must be emptied.
Periodically clean the grid (15) and the drip tray (16):
- Disassemble these parts and empty the container (16).
- Wash with a soft sponge and dish detergent. Rinse and dry well before reassembling them.
With use, the filter holes could become clogged. Visually check that they are free.
If they are clogged, put the filter in the filter holder and assemble the machine without adding the coffee.
Press the 2 cups button (10) to dissolve impurities and coffee residues.
CONTAINER and HOUSING
GRID AND DRIP COLLECTING CONTAINER
FILTERS (18 – 19 – 20)
) or (10 -
). The lights of buttons twinkle to indicate
) or (10 -
). The lights of buttons twinkle to indicate that
17
Publicité
