Publicité
Confiden�al
Alterna�ve an� �p method:
If the an� �p brackets cannot be connected securely, you must use the alterna�ve method below.
In this method, you can use wooden girders to avoid the risk of �pping over.
It must be installed as illustrated in the figure below.
There must be no clearance between the product and the wooden girder.
Minimum sec�on dimensions of the wooden girder must be 3"x4" (75 mm x 100 mm). Width of the girder must be
equal to the clearance where it will be installed.
An addi�onal girder must be used if the niche depth is more than an�cipated. The wooden girder must contact the
product with a maximum size of 2" (50.8 mm).
To determine the loca�on for the wooden girder, mark it on the rear wall, select suitable screws and connect safely.
WARNING:
Number and features of the screws to be used for the wooden girder must be determined so that there is no safe
connec�on.
WWW.KUCHT.COM
37
Publicité
