Publicité
EN
service@toptro.com
to quickly adjust the focus of your image.
2.Use manual focus mode when you need more precise control over
the focus of your image. Long press the focus button "F+" , "F-" until the
image is clear.
5.3 Keystone Correction Menu
5.3.1 Automatic Correction after boot
Turn on this button, when you start the projector, please wait patiently for
2-3 seconds, the projector will automatically focus after powering on.
5.3.2 Automatic Correction after displacement
Turn on this button, the projector will automatically keystone correction
when changing the position.
Notice:
If you are not satisfied with the automatically corrected image,
the projection screen is not rectangular, you can adjust it by 4-point
keystone correction.
20
5.4 Zoom Menu
* Select the [Custom Zoom] option, press the "OK" button on the remote
controller to enter the submenu [Scale scaling], press the "OK" key to
select this button to enter a three-level menu [Zoom], you can adjust the
projection size by adjusting the parameters, zoom range is 0—50.
6.System Update
Go to home page - - Select the [Setting] menu - - Select the [System
Info] Option - - Select the [System Upgrade]
Notice:
If the software currently is the latest, you do not need to
upgrade the software. During the upgrade process, if you have any
question, please feel free to contact us via
service@toptro.com
service@toptro.com
21
EN
Publicité
