Publicité
PRODUCT SPECIFICATIONS
COMPONENT
Connections
Adapter
Length
Maximum Pressure
Maximum Water Flow
Maximum Water Temperature
IMPORTANT SAFETY INSTRUCTIONS
DANGER:
To reduce the risk of injury, the user must read and understand this operator's manual as well as
the operator's manual for their pressure washer before using this product. Failure to follow all
warnings and precautions may result in death, serious personal injury, or property damage.
WARNING:
Keep at least 10 feet away from power lines. Do not touch or aim spray at electrical wiring of any
kind.
Do not extend or retract the telescoping wand or change nozzles or accessories while spraying or
while the wand is under pressure. Turn off the pressure washer, shut off the water supply, point
the nozzle in a safe direction, and pull the trigger to release water pressure before making any
changes.
Do not use the telescoping wand while on a ladder or scaffolding.
When using the telescoping wand at any position less than fully extended, make sure the high
pressure hose is located so that it will not be stepped on, tripped over, or otherwise subjected to
damage or stress. Keep the hose clear of the working area.
Do not exceed the maximum rated pressure, volume, or temperature listed in the product
specifications.
Do not remove or alter any warning labels included on the telescoping wand.
Before beginning operation, make certain the area you plan to work in is clear of obstructions or
hazards.
Maintain proper balance and control of telescoping wand at all times.
To minimize the risk of kickback, grip the telescoping wand firmly with both hands. A firm grip
together with a stiff arm will help you maintain control of the telescoping wand if kickback occurs.
PREPARATION
Before assembling or operation of product, make sure all parts are present. Compare parts with
package contents list. If any part is missing or damaged, do not attempt to assemble, install or
operate the product.
• Estimated Assembly Time: 10 minutes
• Tools Required for Assembly: Adjustable Wrench (not included)
SPECIFICATIONS
M22 Inlet, 1/4 in. Quick Connect Tip, Threaded
Accessory Port
Female M22 x 3/8 in. Male Quick Connect
4 ft. extends to 18 ft.
up to 4,200 PSI
8 GPM
140°F (60°C)
3
www.surfacemaxx.com
Publicité
