Publicité
2. Anthem+ System Layout
AC
Power
Component
Cable Connections
Controller
AC Power
The amplifier can be controlled digitally when connected to the K-27756-NA
Anthem+ system controller. The controller powers the interface(s) and controls the
amplifier and other system components.
NOTE: A data cable is provided to connect the amplifier to the controller. If the
amplifier is not within 6' (1.83 m) of the controller, obtain a longer Ethernet-style
cable or add an extension cable.
Disconnect the power from the amplifier and the controller.
Connect one end of the data cable into the port on the back of the amplifier.
Connect the other end of the cable into one of the four grouped component ports
on the controller.
Reconnect the power to the amplifier and the controller.
Kohler Co.
60" (1.5 m) Cord
6' (1.83 m) Data Cable
Speakers
Digital
Valve(s)
9
Interface
(Up to Four)
Amplifier
1585746-2-A
Publicité
