Publicité
interference, and (2) this device must accept any interference, including interference
that may cause undesired operation of the device.
This transmitter with its antenna complies with Industry Canada RF Exposure Limits
for General Population/Uncontrolled Exposure.
This Class B digital apparatus complies with Canadian ICES-003.
The power plug of the device must remain easily accessible.
Range and Function Disclaimer
BLUETOOTH® is the name for a short-range radio frequency (RF) technology that
operates at 2.4 GHz. The effective range of most BLUETOOTH mobile devices is 10
meters. BLUETOOTH is designed for very low power use. The compatibility of the
BLUETOOTH amplifier interface to mobile/portable devices differs according to the
various individual devices and, in particular, may vary with different software
versions for a device. The normal mobile device BLUETOOTH range can be up to 10
meters, however, placement of your mobile device and the BLUETOOTH amplifier's
installation environment will impact your reception range.
Water and walls can act as blocking agents to the BLUETOOTH signal that your
mobile device is using to broadcast to your BLUETOOTH amplifier. Therefore,
selecting an installation location that removes these range blocking obstacles will
increase the effective range and performance of your BLUETOOTH amplifier.
You can test your BLUETOOTH reception by performing simple range tests using
your mobile device prior to performing a permanent installation. The best way to
make use of the short BLUETOOTH range is to make sure your BLUETOOTH
amplifier is as close to the BLUETOOTH transmitter (mobile phone, tablet, etc.) as
possible. The less distance between the two devices, the greater will be the reliability
of your BLUETOOTH audio signal, and the less distance means less obstacles in the
medium through which the transmission is passing, so there is a reduced chance of
audio signal loss.
The compatibility of the BLUETOOTH amplifier to mobile/portable devices differs
according to the various individual devices and, in particular, may vary with
different software versions for a device. All functions are based on industry-wide
communications standards. Compatibility between the BLUETOOTH amplifier and
mobile device is therefore largely dependent upon the software version of the mobile
device. Other factors (e.g. installation location, walls, distance) mean that in
individual cases, sporadic impairment of functions may occur in devices that
otherwise function reliably. Not all functions are supported in all countries.
Because of these reasons, Kohler Co. can assume no guarantee for the unlimited
compatibility and functionality of your mobile device in conjunction with the
BLUETOOTH amplifier.
1585746-2-A
Kohler Co.
17
Publicité
