Publicité
Lensys Professional
U s e r m a n u a l
To facilitate the Focal-JMlab warranty, it is now possible to register
your product online, at www.focal.com/warranty
You have just acquired a Focal product, and we thank you for that. Welcome to our world, that of professional headphones.
Innovation and excellence are our values; our sole objective is to offer you a transparent, faithful, and precise sound. To
make the most of your product's performance, we recommend reading the instructions in this booklet and keeping it safe
for future reference.
1. Package contents
2. Connecting your headphones
Connect the 1/8'' (3.5mm) jack adapter to the connector located on the left-hand earcup of the headphones (fig. 2). Then
connect the cable to your source, with the option to screw 1/8'' (3.5mm) point socket – 1/4'' (6.35mm) point plug. Before
connecting the headphones, ensure that the source is switched on and the sound level is set to zero.
3. Caring for your headphones
You can clean the headphones by simply dusting with a soft, dry cloth. If there are any stains or marks on the leather parts,
contact a specialist as it is not advisable to clean this material yourself.
Take care not to apply pressure on the earpads for too long. If the earpads show signs of wear, they are easy to replace:
carefully pull on the earpads to detach the 6 clips (fig. 3). When replacing the earpads, make sure the clips are all correctly
attached. They must be replaced with the same model. Contact your dealer, who will be able to provide you with the spare
parts you need.
For the purposes of improvement or to take into account any legal or regulatory changes, FOCAL-JMLab reserves the right to modify the technical
specifications of its products without prior notice. Where required, any images shown are for illustrative purposes only, and may differ slightly from the
products sold.
10
Publicité
