Publicité
• Temporarily install a nipple to each tee/elbow. Do not use any sealant.
• Do not strap the pipes at this time.
2. Install the plaster guard
• Install the plaster guard.
• Push until the plaster guard is snug against the face of the elbow (or tee)
3. Set the pipe depth
NOTE : Thin wall installations have a finished wall thickness of less
than 1/2" (1.3 cm).
• To adjust the pipe depth, use a level or other straight edge to line up the "Thin Wall
Installation" mark with the front face of the studs.
16
All manuals and user guides at all-guides.com
All installations
Elbow (or Tee)
Plaster guard
Thin wall installation
Align mark with the front of
the stud face.
English
Publicité
