Publicité
20
* For Plug Type.
Power on / Einschalten / Mettre sous tension / Encendido / Ligar / Inschakelen
/ Accensione / Zasilanie włączone / Zapnutí / Slå på / Pornirea / Включване на
захранването / Tænd / Ενεργοποίηση / Lülitage sisse / Kytke päälle / Uključite
napajanje / Bekapcsolás / Maitinimo įjungimas / Ieslēgšana / Zapnúť / Vklop / Güç
açma / Ligar a energia
• Turn on the RCBO.
• Check the status of the LED indicator:
1. When the device is powered on, the buzzer will give a short sound, and the indicator
light will be solid or breathing green ("Available" state) after three seconds by default.
The EV-Charger has been successfully connected with network server if the indicator
light is solid green and it is off-line if the light is breathing green.
2. Then the system will start self-checking automatically. After the checking process, if
there is any fault, the indicator light will be solid red ("Faulted" state), please check if
it is correctly installed and connected.
3. If it works normally:
1) When the charging connector is not plugged, the indicator light will be solid or
breathing green ("Available" state);
2) When the charging connector is plugged in but the device is not charging, the
indicator light will be solid blue ("Preparing" state);
3) When the charging connector is plugged in and the device is in charging process,
the indicator light will show as the "Charging" state (the color will be displayed
according to the application scene and charging mode and the flowing speed will be
determined by the charging power.
66
Publicité
