Publicité
15
16
Note:
For Inverter side:
COM port of
the inverter
Inverter side (one example)
Connect the other end of the communication cable
to the COM or RS485 port of the inverter.
64
3
2
1
2
1
17
For CT side:
L wire
1. The arrow on the CT must point at the public grid.
2. When using the three-phase CT, please clip the CT
clamps on the corresponding phases (CT-R must
be connected to grid L1, CT-S connected to grid L2,
CT-T connected to grid L3).
* If extended communication cable for CT is needed:
CT
* Make sure the unused
hole(s) of the stopper are
sealed with the plug(s).
2
Hand-tight
Grid
RJ45
connector
EV-Charger
1
Publicité
