Publicité
Troubleshooting Gas Burner
Problem Observed Possible Reasons
Flame looks too small
Failure to ignite
Noisy Flame
If the problem persists after trying the following solutions please contact Gozney
for further support.
• Gas canister is near empty
• Gas canister is too small
• Ambient temperature is
below 0
C
o
• Blocked burner
• Ignition battery is empty
• Blocked burner
• Gas canister is empty
• Incorrect ignition
• Blocked Burner
Solution
• Try replacing the gas canister if it is
empty.
• The canister may be too small. We
recommend a 5kg canister as a minimum.
• If the ambient temperature is below 0
it is to be expected that a loss of power
from the gas canister will occur.
• The burner could be blocked, please
refer to cleaning instructions available in
this manual.
• If firing for the first time or replacing a
gas bottle the burner can take up to
30 seconds for the gas to flow through
the system. Keep the control knob in
for 30 seconds after firing until the FFD
disengages.
• If the control knob is not making a
clicking sound when pushed in try
replacing the battery at the back of the
unit. Remove the thermometer display to
expose the battery cap for the ignitor
• If the burner is making a loud grumbling
sound first turn the burner down to
low flame and then back to high. If the
sound continues turn the burner off
for 5 minutes and retry igniting it. If the
problem persists still review the cleaning
and maintenance instructions to remove
debris in the burner.
C
o
41
Publicité
