Publicité
CONNECTING THE GAS HOSE
To attach the quick connection gas hose
to your Arc pull the collar back on the
connector and place the hose onto the
gas inlet. When you release the collar
it should return to its original position
freely. This connection must be tested
for leaks before using the oven.
Inspect the hose before each use of
the appliance. If there is evidence
of abrasion, wear, cuts, or leaks, the
36
hose must be replaced prior to the
appliance being put into operation. Any
replacement hose assembly or pressure
regulators shall be that specified by
Gozney, for more details visit the Gozney
website. www.gozney.com. Keep the gas
hose away from any heated surface(s).
Publicité
