Publicité
Les langues disponibles
Les langues disponibles
SB118
Subwoofer Enclosure
USER MANUAL
VERSION 1.1
The L-ACOUSTICS
®
wiring convention is as follows:
Figure 4: Connecting one SB118 to an LA4 amplified controller
Figure 5: Connecting two SB118 in parallel to an LA8 amplified controller
!
To ensure both high performance and safety, L-ACOUSTICS
high-quality, fully insulated speaker cables made of stranded copper wire.
In order to preserve a high damping factor it is desirable to keep loudspeaker cables as short as
possible and with a gauge offering low resistance per unit length.
IMPORTANT
The following table provides information regarding the recommended length versus wire cross-section. Two cases are
possible depending on the impedance load value connected to the LA4 or LA8 (8 Ω for a single SB118 enclosure, 4 Ω
for two SB118 enclosures in parallel):
SB118_UM_ML_1.1
All manuals and user guides at all-guides.com
®
Speakon
connector labels
1+
1-
2+
2-
SP.7, SP10, or SP25
DOSUB-LA8
w w w . l - a c o u s t i c s . c o m
Connections to transducer
IN +
IN -
Not used
Not used
SP.7
®
recommends the exclusive use of
10 en
Publicité
