Publicité
GO series microphones - Lavalier, headband or handheld UHF systems
3.3 - Battery charge level indicator
3.4 - Using the output selector
3.5 - Using the 19" coupler (optional: FREE-RACK Code H9374)
- This LED flashes to indicate the
batteries are almost empty and need
to be replaced or charged.
- Use the MIC/LINE located at the rear
of the transmitter box to adjust its input
level.
- Place it on MIC if you are using a
condenser microphone such as a
GOLava or GOHead.
- Place it on LINE if you want to connect
a line level device such as CD players.
- Acquiring two GOMono allows you to
couple them into a 19" rack.
- Each receiver is supplied with screws.
- The optional coupler allows you to
bind two receivers together.
English
Page 21
Publicité
