Publicité
Optical fiber cable
Coaxial cable
«cic
d
HAL
2
Turntable
OUTPUT | GND
Only for —
turntable with
ground terminal.
uS
e. ]
z
If you have a graphic 'equalizer, connect it
to the TAPE terminals (e page 24).
соппесіпа[аідќаеашртепі
Satellite receiver, etc.
Changing
the digital input settings
You can change the input settings for the
digital terminals if necessary (for example,
if your CD player doesn't have a coaxial
output terminal). Note the equipment you
have connected to the terminals, then
change the settings (@ pages 12-13). .
Optical fiber cable connection
Dust cap
e Do not bend the optical fiber cable.
° If the digital optical connector is not
going to be used, be sure to attach
the dust cap to prevent exposure to
dust.
This unit cannot decode Dolby Digital
RF {radio frequency) signals from a
laser disc player.
CD player
8 Con
7
ROT5982
Publicité
