Publicité
SPEAKERSB
DVD 6CH INPUT
SPEAKERS
BI-AMP
BI-WIRE
OVD 6CH INPUT
'
`
-— SPEAKERS —-
BI-WIRE
BI-AMP
30%
PEAKERS—
BI-WIRE
-— SPEAKERS —
B
~SPEAKERS—
H
Enjoying the sounds
|
---
--.--
-..-
me
ee
. а...
————
A
To switch between DVD 2 channel and 6 channel
input
|
|
There may be times when you need to use analog input for DVD,
for example, to enjoy sources recorded with linear PCM and
multiple channel linear PCM.
Select the analog input mode to suit the source.
DVD: For two-channel audio.
DVD 6CH: For multiple channel audio.
Press [DVD 6CH INPUT].
Each time you press the button:
DVD — DVD 6CH
Input switches automatically to DVD if you press this button while
another source is selected.
Once you have set the mode, that mode is engaged whenever you
select "DVD."
e DVD 6CH INPUT only works when SPEAKERS A is on and
SPEAKERS В is off, or when SPEAKERS BI-WIRE is on.
Ф You cannot use any of the DSP sound modes while DVD 6CH
INPUT is on.
|
e Speaker settings (ар page 13) are ineffective while DVD 6CH
INPUT
is on. Change
the settings on the DVD
player if
necessary.
.
e The bi-amp turns off when you select DVD
6CH INPUT
(m$ below).
:HM
To enjoy bi-amp sound
By using the bi-wiring feature of this unit to connect your speakers
(æ page 11), you are able to take advantage of two separate
amplifiers for the high frequency and low frequency ranges. This
enables more highly defined sound reproduction of the two ranges
thus producing high quality bi-amp stereo sound.
Ensure *BI-AMP" lights when [BI-WIRE] is
selected.
В!-АМР
will turn off and the indicator will go out in the
following cases:
e if any of the DSP sound modes are turned оп.
e If DVD 6CH INPUT is selected.
ө Before pressing (BI-WIRE], connect speakers designed for bi-
wiring using bi-wiring connection.
e Do not select [BI-WIRE] if you have connected two sets of
speakers to the A and B speaker terminals.
0
То use SPEAKERS B
Use SPEAKERS B if you have connected another set of speakers
to the B terminals.
Sound will be heard in stereo while SPEAKERS B is on.
Press [B].
If you don't want sound coming from the speakers connected to the
A terminals, press [A] to turn them off.
`
Ë Ope
ROT5982:
Publicité
