Publicité
3. To carbonate, press the carbonating button in short 1 second
presses; 3 presses for standard carbonation and 5 presses for
strong carbonation.
4. When the desired level of carbonation is achieved, gently pull
the plastic carbonating bottle towards you until it reaches its
fully forward position. This will release the pressure in the plastic
carbonating bottle and allow the plastic carbonating bottle to
be released from the Snap-Lock.
WARNING! Do not remove Plastic Carbonating Bottle until after
hearing the sound of excess CO being released. Never force
the Plastic Carbonating Bottle out of the Snap-Lock. Always allow
the Sparkling Water Maker to release the Plastic Carbonating Bottle.
If the Plastic Carbonating Bottle does not immediately release, then
push the Plastic Carbonating Bottle back into the vertical position
and gently pull it towards you again. Attempting to remove the
Plastic Carbonating Bottle while it is still pressurized can cause
uncontrolled ejection of the Plastic Carbonating Bottle and
may result in serious injury.
CARE
SPARKLING WATER MAKER CARE
1.
Never use abrasive cleaners or sharp tools to clean.
To make your Sparkling water maker shine like new, use the
special cleaning cloth supplied with the machine. You can
also use stainless steel cleaning agents for home appliances.
2.
Remove the drip tray and wipe spills to keep base dry. Drip
tray is dishwasher-safe.
3.
Do not place your Sparkling Water Maker in water or wash
in a dishwasher, doing so will seriously damage your
Sparkling Water Maker.
PLASTIC CARBONATING BOTTLE CARE
1.
For plastic carbonating bottles which are not "dishwasher safe",
to clean, rinse plastic carbonating bottles with cold or lukewarm
water. WARNING! Do not expose to heat above 50°C / 120°F.
Never wash or rinse in hot water. Do not wash in dishwasher.
2.
For "dishwasher safe" plastic carbonating bottles, to clean,
either wash in dishwasher or rinse Plastic Carbonating Bottles with
cold or lukewarm water. WARNING! Do not expose to heat above 70°C / 158°F.
3.
The bottle base is removable. Removing the base & cap before cleaning ensures best hygiene. After removing
the base, follow cleaning instructions of the bottle as shown above. The metal base cup may be cleaned in
the dishwasher.
4.
To remove the base- hold the bottle, gently turn and pull the
base until it comes loose. After cleaning, put it back by turning
until it clicks into place.
FOR YOUR SAFETY
SAVE THESE INSTRUCTIONS AND PROVIDE THEM TO ANY SUBSEQUENT USERS.
WARNING! Before using the Sparkling Water Maker, to reduce risk of personal injury and damage to your
product, please read this important safety information.
Before allowing anyone to use your Sparkling Water Maker, please be sure they understand how to do so safely. Any
servicing or repair should be performed by a SodaStream-authorized service representative. The Sparkling Water Maker is
only intended for use by people over the age of 12. People with reduced physical or mental capabilities should only use
the product if they are supervised by an adult responsible for their safety and after they have been given instruction
concerning the safe use of the product. Do not transport the machine with the cylinder and/or bottle attached.
3
4
A
B
Note: You may see small pieces of ice appear in the
water during carbonation of very cold water. Any
ice created will simply melt.
1
3
x3
x5
2
4
3
Publicité
