DeWalt DCH254 Traduction De La Notice D'instructions Originale page 42

EnGLIsH
the air vents. Wear approved eye protection and approved
dust mask when performing this procedure.

WARNING: Never use solvents or other harsh chemicals
for cleaning the non-metallic parts of the tool. These
chemicals may weaken the materials used in these parts.
Use a cloth dampened only with water and mild soap.
Never let any liquid get inside the tool; never immerse any
part of the tool into a liquid.
Optional Accessories

WARNING: Since accessories, other than those offered
by D WALT, have not been tested with this product, use
e
of such accessories with this tool could be hazardous.
To reduce the risk of injury, only D
accessories should be used with this product.
Various types of SDS Plus drill bits and chisels are available as
an option. Accessories and attachments used must be regularly
lubricated around the SDS Plus fitment.
Dust Extraction System (Fig. H)
For some compatible hammerdrills, a dedicated integrated dust
extraction system is available and can be purchased separately.
DCH273, DCH274
The dust extraction system is powered by an electrical
19
connection to a compatible hammerdrill.
DCH283
The dust extraction system is powered by an mechanical
19
connection to a compatible hammerdrill.
Consult your dealer for further information on the compatibility
of appropriate accessories.
Protecting the Environment
Separate collection. Products and batteries marked
with this symbol must not be disposed of with normal
household waste.
Products and batteries contain materials that can
be recovered or recycled reducing the demand for raw
materials. Please recycle electrical products and batteries
according to local provisions. Further information is available at
www.2helpU.com.
Rechargeable Battery Pack
This long life battery pack must be recharged when it fails
to produce sufficient power on jobs which were easily done
before. At the end of its technical life, discard it with due care for
our environment:
• Run the battery pack down completely, then remove it from
the tool.
• Li-Ion cells are recyclable. Take them to your dealer or a
local recycling station. The collected battery packs will be
recycled or disposed of properly.
40
WALT recommended
e