Publicité
• Do not touch the appliance with wet hands or feet.
• Do not move the appliance when it is running.
• Do not allow the appliance to be exposed to the weather (sun, rain,
etc.).
• Should the appliance fail or not work correctly, disconnect the power
cord immediately. Check that it is not damaged, and thereafter turn
it back on: if in any doubt, consult a qualified professional.
• Do not pull on the power cord or the appliance itself to unplug the
appliance from the plug point.
• Do not pull on the power cord to move the appliance.
• Do not use the appliance if it does not work properly or if it appears
damaged; when in doubt, contact a qualified technician.
• Ensure the heating element is free of dust, lint, or any similar material:
this improves the fan heater's performance, and prevents
overheating. Periodically check that the aspiration grille does not
become obstructed by objects, fabrics or other materials to prevent
overheating or breaking the appliance.
•
WARNING: do not use this heater in small rooms when they are
occupied by persons not capable of leaving the room on their
own, unless constant supervision is provided.
•
WARNING: to reduce the risk of fire, keep textiles, curtains, or any
other flammable material a minimum distance of 1 m from the air
outlet
INSTALLATION
• After unpacking, check that all parts of the appliance are present; if in doubt, do not use and
contact a qualified technician. The packaging materials (plastic bags, polystyrene, metal
staples, etc.) must not be left within reach of children, as they are potentially hazardous.
• All packaging elements must be disposed of according to their raw material (see the symbol
stamped on each one) and according to the provisions of their municipality.
elements of the packaging with low weight (es: packing tape) are unmarked as are its small
size packing materials, the protective film of surfaces: therefore you have to follow the
procedures for the disposal in force in your municipality.
• Before connecting the appliance, check that the voltage on the data plate matches that of
the electric system. In the event of incompatibility between the plug point and the appliance's
13
The secondary
Publicité
