Publicité
Part 9
OPERATING YOUR DRYER
3 3
Dryness Intensity Control
Note
DRY LEVEL selections can only be made while
using Sensor Dry Cycles. Selecting
MORE Dry or LESS Dry automatically adjusts the
needed time which is already sensed.
4 4
Temp. Control
Use Temp. Control Option to select temperatures
for the Manual Cycles. Press TEMP. CONTROL
until the desired temperature setting glows.
Temperature modifiers cannot be used with the
Sensor Dry Cycles.
Type of Load
Foam rubber-pillows,
padded bras, stuffed toys
Plastic-Shower curtains,
tableclothes
Rubber-backed rugs
Olefin, polypropylene,
shear nylon
All manuals and user guides at all-guides.com
• Use this button to set dry
level
• First, select sensor dry
cycle.
• Select dry level to adjust
how much you want to
dry the load. As the cycle
runs, the control senses
the dryness of the load
and adjusts the time
automatically based on
the selected dryness level.
Default Time*
(Minutes)
20 - 30
20 - 30
40 - 50
10 - 20
5 5
Drying Time Control
Use Time Dry Option to change
Drying Time on your own.
You can select the desired operation
time manually by pressing Time Dry
button which ranges from 20 to 60
minutes.
Manual Preset Cycle Settings
Manual Dry
Cycles Load Type
SPEED DRY
SMALL LOADS
FRESHEN UP
Remove Wrinkles
AIR DRY
6 6
Beeper On/Off
The BEEPER controls the
volume of the beep that is made
when you press any of the
buttons on the control panel and
the termination of any cycle is
indicated.
Press BEEPER to adjust the
sound level or turn off the signal.
7 7
CUSTOM PROGRAM
Custom Programming Set up your
favorite combination
of settings and save them here for one-
touch recall.
1. Select a cycle
2. Change DRY LEVEL and TEMP. CONTROL.
3. Select OPTIONS you want.
4. Press and hold the CUSTOM PROGRAM.
To recall your stored CUSTOM PROGRAM
Press CUSTOM PROGRAM button, then press
START/PAUSE.
Default Time*
Temp.
(Minutes)
High
25
Medium
20
High
30
Air Dry
2 1
Publicité
