Publicité
• The top of the appliance must be kept
clear to allow better air circulation. If a
wall unit is fitted above the appliance,
there must be a gap of 50 mm between
this unit and the wall and it must be at
least 50 mm below the ceiling.
Fitting the plinth
Alignment height of 820 mm
• If using a 140 to 170 mm plinth, make a
cut-out as shown.
• If using a plinth higher than 100 mm but
less than 140 mm, cut the height com-
pensation strip supplied with the appli-
ance to the required depth and fit it be-
tween the plinth and the ventilation grille,
pressing it into position below this grille.
• If using a 100 mm plinth, fit the complete
height compensation strip.
Alignment height of 870 mm
• If using a 190 to 220 mm plinth, make a
shown.
electrolux 33
Publicité
