2. To secure the tensioning ropes, use the loops as shown in
Fig. B to prevent unintentional opening of the mountings.
Wrap the tensioning ropes twice around the suspension
option, e.g. a tree.
Note: Ensure that the loose end of each tensioning rope is
at least 10cm, so that it cannot slip through the loops.
3. If the straps of the products have loosened, fasten the
self-securing loops again (Fig. C).
Use
Important!
Ask someone to help you to climb in and out of the product,
to minimise the risk of falling out.
Climbing in and out of the product, without
help
1. Stand in front of the product, in the centre.
2. Balance the product with one hand.
3. Carefully sit in the product, and balance it with your hand.
4. Fully lie in the product.
Storage, cleaning
When not in use, always store the product clean and dry at
room temperature.
Wash the product in a delicate cycle. Wash only with similar
colours.
18
GB/IE