Publicité
3
Connections
KT 320: 2 mini-DIN connections
KTT 320: 4 mini-thermocouples
connections
KP320, KP321: Two pressure
connections
5
Recorder function
Five recording modes
KISTOCK can record in 5 different ways:
• "Immediate" mode records values according to a predefined interval.
• "Minimum", "Maximum" and "Average" record automatically the calculation of minimum, maxi-
mum or average of measured values during an interval of recording.
• "Monitoring" mode allows to get an accurate history report during error events to help troubleshoot-
ing, without stopping the measurement logging. To proceed this way, you just have to define:
- a record interval to be used whilst the readings are beyond the setpoints
- a record interval for the values measured during each reading beyond the setpoints
• Furthermore, you can also let your KISTOCK record non-stop ("loop" recording option).
Four types of dataset start
Once your recording mode has been set, you can launch your dataset:
• With a delayed start (with predefined date and time)
• With the software
• With push-button
• With "Online" option. In this case, your datasets are directly sent, saved and displayed on your PC in
real time.
Six types of dataset stop
You can stop your dataset:
• According to a date and time (if it was started the same way)
• According to a period
• According to a predefined number of recording points
• Once the storage capacity is full
• With "Stop" option of the software
• By holding "OK" key during 5 seconds, if this function has been previously activated by the software
PC connection
Micro-USB
connector
Publicité
