All manuals and user guides at all-guides.com
Specifications
Monitor
Specifications
LCD Module
Diagonal :
Viewable Image Size :
Native Resolution (Pixel Count) :
Input Signal
Video :
Sync :
Display Colors
Analog input :
Maximum
Left/Right :
Viewing Angles
Up/Down :
Synchronization
Horizontal :
Range
Vertical :
Resolutions Supported
Active Display Area
Horizontal :
Vertical :
Power Supply
Current Rating
Dimensions
Weight
Environmental Considerations
Operating Temperature :
Humidity :
Feet :
Storage Temperature :
Humidity :
Feet :
*
1
Interpolated Resolutions: When resolutions are shown that are lower than the pixel count of the LCD module, text may appear different. This is
normal and necessary for all current flat panel technologies when displaying non-native resolutions full screen. In flat panel technologies, each
dot on the screen is actually one pixel, so to expand resolutions to full screen, an interpolation of the resolution must be done.
NOTE: Technical specifications are subject to change without notice.
NX86LCDmanual040703.p65
DiamondPoint NX86LCD
Monitor
18.1 inch
18.1 inch
1280 x 1024
ANALOG 0.7 Vp-p/75 Ohms
Separate sync. TTL Level
Horizontal sync. Positive/Negative
Vertical sync. Positive/Negative
Composite sync. Positive/Negative
Sync on green (video 0.7Vp-p and sync Negative 0.3Vp-p)
16,777,216
70°/70°
70°/70°
31.5 kHz to 81.1 kHz (Analog)
31.5 kHz to 80.0 kHz (Digital)
56.0 Hz to 85.0 Hz
720 x 400*
1
:VGA text
640 x 480*
@ 60 Hz to 85 Hz
1
800 x 600*
1
@ 56 Hz to 85 Hz
832 x 624*
1
@ 75 Hz
1024 x 768 @ 60 Hz to 85 Hz
1152 x 870 @ 75 Hz
1280 x 1024 @ 60 Hz to 75 Hz (Analog) ....... NEC-Mitsubishi Electronics Display cites
1280 x 1024 @ 60 Hz (Digital)
359 mm/14.1 inches
287 mm/11.3 inches
AC100 - 120V/220-250V Hz
0.8 – 0.4A
398 mm (W) x 402.8 mm (H) x 200 mm (D)
15.7 inches (W) x 15.9 inches (H) x 7.9 inches (D)
7.3 kg
16.1 lbs
5°C to 35°C/41°F to 95°F
30% to 80%
0 to 10,000 Feet
-10°C to 60°C/14°F to 140°F
10% to 85%
0 to 30,000 Feet
12
12
Notes
Active matrix; thin film transistor (TFT)
liquid crystal display (LCD); 0.28 mm dot
pitch; 200cd/m
2
white luminence;
350:1 contrast ratio, typical
Digital Input: DVI
Depends on display card used.
Automatically
Automatically
Automatically
Some systems may not support all modes listed.
recommended resolution at 60 Hz for
optimal display performance.
4/7/03, 8:29 AM