Publicité
All manuals and user guides at all-guides.com
Controls
–continued
Tools 2
LANGUAGE: OSD control menus are available in seven languages.
OSD POSITION: You can choose where you would like the OSD control image
to appear on your screen. Selecting OSD Location allows you to manually
adjust the position of the OSD control menu left, right, down or up.
OSD TURN OFF: The OSD control menu will stay on as long as it is use. In the
OSD Turn Off submenu, you can select how long the monitor waits after the
last touch of a button to shut off the OSD control menu. The preset choices are 10,
20, 30, 45, 60 and 120 seconds.
OSD LOCK OUT: This control completely locks out access to all OSD control
functions. When attempting to activate OSD controls while in the Lock Out
mode, a screen will appear indicating the OSD controls are locked out. To
activate the OSD Lock Out function, press SELECT, then + key and hold down
simultaneously. To deactivate the OSD Lock Out, press SELECT, then + key and
hold down simultaneously.
HOT KEY: You can adjust the brightness and contrast directly. When this
function is set to ON, you can adjust the brightness with
+ or - key, while the OSD menu is off.
FACTORY PRESET: Selecting Factory Preset allows you to reset most OSD
control settings back to the factory settings. Individual settings can be reset by
highlighting the control to be reset and pressing the RESET button.
Information
DISPLAY MODE: Indicates the current display resolution and frequency setting
of the monitor.
MONITOR INFO.: Indicates the model and serial numbers of your monitor.
OSD Warning: OSD Warning menus disappear with Exit button.
NO SIGNAL: This function gives a warning when there is no signal present.
After power is turned on or when there is a change of input signal or video
is inactive, the No Signal window will appear.
RESOLUTION NOTIFIER: This function gives a warning of use with opti-
mized resolution. After power is turned on or when there is a change of
input signal or the video signal doesn't have proper resolution, the
Resolution Notifier window will open. This function can be disabled in
the TOOL menu.
OUT OF RANGE: This function gives a recommendation of the optimized
resolution and refresh rate. After the power is turned on or there is a
change of input signal or the video signal doesn't have proper timing, the
Out Of Range menu will appear.
NX86LCDmanual040703.p65
9
9
or
, contrast with
4/7/03, 8:29 AM
Publicité
