PMS KTP EVO 2 Manuel D'utilisation page 15

 KTP EVO
WARNINGS :
- Before using this product, carefully read
through these instructions and keep them
safe.
- If this product is to be resold outside the
fi rst destination country, the reseller must
provide this instructions manual, drafted
in the language of the country in which the
product will be used.
- Any work at heights is risky; only
individuals with perfect health and in good
physical condition should work at heights
and confront any emergency situations.
- This equipment
instrument; any incorrect use can cause
mortal danger to the user in case of a fall.
- It is recommended to individually allocate
this product to a single user.
- Only a person who is trained and
competent, or one who is under the
surveillance of such a person, may use
this product.
- Ensure that there is a rescue plan in
place that is properly understood before
and during use so as to enable safe and
effective intervention if required.
- This equipment should not be used
beyond its limits or in any other situation
than the one(s) for which it is designed.
- If there is any doubt on the reliability
of the equipment, do not use it without
getting the written authorisation of a
person who is authorised to decide on its
reuse.
NOMENCLATURE (#1):
Harness KTP EVO #1
1 Fixed shoulder straps
2
Shoulder strap adjustment buckles
3 Straps adjustment braces
4
Thigh straps
5
Automatic closing buckle
6 Bavarian
7
Dorsal hooking D-ring
8 Seat strap
9 Storage bag with integrated PAD
10 Identifi cation label
KTP EVO 2 #1-A
A1 Harness KTP EVO
is a vital safety
15
A2 Energy absorber with integrated single
lanyard, ABSS model
KTP EVO 4 #1-B
B1 Harness KTP EVO
B2 Energy absorber integrated in an
elastic lanyard, ELAS model
KTP EVO 6 #1-C
C1 Harness KTP EVO
C2 Energy
absorber
double lanyard, YABSS model
KTP EVO 11 #1-D
D1 Harness KTP EVO
D2 Single restraint lanyard, LS model
DESCRIPTION :
The KTP EVO fall prevention harnesses
are personal protective equipment (PPE)
against falls in accordance with standard
EN361. Depending on the model, the
harness is equipped with a fall prevention
system or a non-removable restraint
system (#3). A storage bag, attached to
the harness, completes the set.
The KTP EVO harness consists of a dorsal
fall prevention point identifi ed by the letter
A (in accordance with standard EN361 #2)
Harness materials:
• polyester strap
• other components: polyethylene, steel,
Neoprene (storage bag)
The KTP EVO harness is available in only
one size.
The KTP EVO 2 model links the harness
to an EN355 energy absorber integrated
with an EN354 single lanyard.
The KTP EVO 6 model links the harness
to an EN355 energy absorber integrated
with an EN354 double lanyard.
Materials of the lanyard integrated into an
energy absorber:
• polyester lanyard strap
• polyamide and polyester tear absorber
strap
• polyester protective pouch
• aluminium or steel connector
The KTP EVO 4 model links the harness
to an elastic lanyard similar to an EN355
with integrated