Publicité
INSTALLATION
•
All relevant local regulations should be followed when installing the sauna stove,
including those referring to country specific standards and European standards.
•
Before installing and using the sauna stove, thoroughly review the requirements
for installing the sauna stove in the sauna room. If you have questions or to obtain
additional information, be sure to contact the local or national fire safety agency
or consult an authorized specialist.
•
Before installation, make sure the power rating of the stove corresponds to
the volume of the sauna room. The suitable cubic capacity of the sauna room has
been provided in Appendix 1. If there are uninsulated brick, tile or glass walls in the
sauna room, an additional sauna room volume of 1 m
for each square meter of such a wall.
•
The maximum room size where this stove is allowed to be installed has been
presented according to the methodology provided in standard EN15821:2010.
ATTENTION!
The manufacturer's warranty is void if the capacity of the sauna stove
does not correspond to the volume of the sauna room, non-insulated surfaces are
not taken into account and/or there is insufficient ventilation in the sauna.
PRE-INSTALLATION HEATING
ATTENTION!
Before installation, the sauna stove must be heated outdoors at least
once while following general fire safety precautions. This is necessary as the
protective paint layer of the body of the sauna stove emits harmful and
unpleasant-smelling fumes during the first heating. The paint gains durable properties
during the first heating.
6
See more about
best practices for
sauna construction
should be calculated
3
Publicité
