Télécharger Imprimer la page

HUUM HIVE Flow Mode D'emploi page 24

Poêle pour sauna

Publicité

The sauna stove is overheating
• The ash drawer is open during heating.
• The chimney draft is too big.
• Firewood is too thin and/or dry.
• The amounts and intervals of batches are incorrect (see Appendix 1, page 26)
The oven glass is getting sooty
• Sooting of the glass during oven ignition is normal. It is caused by humidity in the
air and cold surfaces where water condenses. When starting the heating, keep the
door slightly open by a couple of millimeters for the first few minutes to allow the
surfaces to dry, and then close the door completely.
• The wood used for heating is too moist. If possible, store/dry the wood indoors.
A flame shoots out when opening the door of the stove.
• Do not open the stove door during the intense burning phase. If it is necessary for
some reason, first open the door a few millimetres for 10 seconds. Then you can
open the door as much as necessary.
24

Publicité

loading

Ce manuel est également adapté pour:

Hive flow lsHive flow miniHive flow mini ls