Power Supply - Bresser GameCam 120 Manuel D'utilisation

1&
Mini USB port
1*
AV OUT socket
1(
Battery compartment in the rear section of
the wildlife camera
ATTENTION!
When using the wildlife camera outdoors, the
camera must always be well sealed in order to
prevent the penetration of moisture and dirt. If the
camera is not used for a longer period, remove the
batteries or disconnect from the external power
supply.
4 Operating Instructions

4.1 Power Supply

The wildlife camera operates on 6V DC voltage.
Power can be supplied using batteries* (8 x AA
batteries) or via an external power adapter*.
ATTENTION!
This device cannot be operated simultaneously
with batteries and a power adapter. This could
*not supplied
lead to irreparable damage to the device; the
manufacturer is not liable for this damage.
4.1.1 Battery Operation
Release the casing latch (7) and open the wildlife
camera.
Insert the 8 AA batteries* into the battery
compartment. Ensure that the poles of the
batteries (+/-) have been correctly positioned, as
indicated in the battery compartment.
Note: We recommend using high-quality alkaline
or lithium batteries.
You can check the battery charge using the "Test"
menu item (see 6.5). The battery charge is shown
by the battery icon at the bottom of the preview
and navigation screen.
ATTENTION!
If you are not using the wildlife camera, remove
the batteries from the battery compartment or
disconnect the camera from the external power
GB
29