Publicité
Battery Replacement
Under normal conditions, the original batteries in your UPS will last many years. See Safety section
before replacing batteries. The batteries are designed for hot-swap replacement (i.e., leaving the
UPS in ON mode), but some qualified service personnel may wish to put the UPS in the OFF mode
and disconnect equipment before proceeding.
Note: Refer to the label on the battery retention plate for the R.B.C. part number.
SMART750RMXL2U and SMART1000RM2U Battery (RBC24VLCD)
Replacement Procedure
1
Remove Front Panel
1
4 x screws
2
Remove Battery Retention Plate
2
4 x screws
201205048 93-3149.indb 18
3
Disconnect Batteries
3
4
Remove/Recycle Batteries
4
18
6/19/2012 11:33:45 AM
Publicité
