Télécharger Imprimer la page

Zendure Hub 2000 Manuel D'utilisation page 17

Publicité

1
2
1
4
Mark Location, Find a position next to Hub 2000, one person fixes the
1
Microinverter on the wall with his hands, and the other person marks the
positions of the two screw holes of the Microinverter with a marker.
Drilling,drill two diameter 8mm mounting holes at the two marked positions.
2
Installing yellow plastic expansion tube of screws, Respectively Install the
3
yellow plastic expansion screw tube into the two holes which step 2 drilling.
Installing Microinverter, One person fixes the Microinverter with both hands
4
on the wall and align the hole drilling in step 2, then put the flat Washers on
the screws,at last screw
plastic expansion tube .
Tighten the screws,screws the rest of
5
completely.Then you also have completed the installation of Microinverter.
5.3.6 Stack AB1000 or AB2000
Before stacking AB1000 or AB2000, please pay attention to the note on the top
of AB1000 or AB2000.
1
Remove the plastic protective covers on the connection port ,then please
1
align the left side first.
Slowly insert the battery connection port.
2
Tips:The Hub 2000 can only be connected to a SuperBase V without a Satellite
Battery, Multiple batteries are not supported.
2
1
2
5
&
screws with flat Washer into the yellow
1
2
1
2
&
screw into the wall
2
EN
2
2
1
1
3
13

Publicité

loading

Ce manuel est également adapté pour:

Zdhub2000