General Outline; Features; Unpacking - Citizen CBM1000 II Mode D'emploi

1. GENERAL OUTLINE

The CBM1000 Type II is a compact thermal line printer designed for use with a broad
array of terminal equipment including data, POS, and kitchen terminals.
With extensive features, it can be used in a wide range of applications.
To obtain the best results from the CBM 1000 Type II printer, please read the
instructions this manual thoroughly.

1.1 Features

Paper drop-in mechanism. Supply/replace paper rolls by simply dropping a paper
roll into the printer and closing the cover. Greatly facilitates paper handling and
head cleaning.
Ease of paper threading and head cleaning.
High speed (150 mm/s), and low-noise thermal printing.
Front-side paper ejection method. Allows printer installation and use anywhere
with few restrictions.
Hermetic covering structure. Protects foreign matter or liquid from entering the
printer.
Built-in input buffer.
Barcode Printing. Made possible using special commands.
Page mode. Now you can arrange pages freely.
Registration of user-defined characters and logos into flash memory.
Built-in drawer kick-out interface.
Auto cutter mechanism provided as a standard unit.
Two types of power supply. Select between an easy-to-handle, built-in power
supply type and lightweight flat AC adapter type.
Can use 58 mm wide paper rolls by employing the supplied partition.

1.2 Unpacking

When unpacking the printer, confirm that the following are provided:
Printer
CAUTION
• Do not use the printer in an environment where condensation can occur. If condensation
forms, leave the power off until it completely evaporates.
Sample paper roll AC adapter
(provided with the A type only)
Partition AC power cord
(not supplied with Type D)
— 9 —
User's manual