Télécharger Imprimer la page

purline PANEL GLASS 1000 Manuel D'utilisation page 24

Publicité

EN
OPERATIONS
TURN ON:
y Plug in and switch on the heater, the heater will enter into standby mode, and show "OF"
on display. Press
temperature 22ºC on display
TEMPERATURE SETTING:
y Temperature setting range is 5ºC-35ºC.
y Default temperature setting is 22ºC.
y Press
by 1ºC after each pressing. It will show setting temperature on display after setting.
TIMER:
y Press
Each pressing is 1 hour. Press
automatically. Timer indicator light will keep on red after setting.
y Timer set range is 0 to 24 hours.
y Press
y After timer close, the heater will enter into standby mode, and press
the heater.
OPEN WINDOW FUNCTION
y The heater has an open window function.
y Default setting of open window function is closed.
y Press and hold
to open open window function, display show "ON", and press
window function, display show "OF", then press
seconds to save automatically.
y Open window function description:
1.
If you open a window widely in the space where the heater is located and the temperature
drop 2ºC or more than 2 ºC in two minutes, a sensor will detect the sharp drop in
temperature. The heater will switch out automatically and show "F0" in display.
2.
The heater will be reignited automatically after 10 minutes. However you can manually
relight the heater before the 10 minutes end by pressing
and show previous operation mode.
24
button to turn on the heater, and show factory default setting
or
button to set temperature, the temperature will increase or decrease
button, "00" flash on display, then press
button again to modify or cancel timer setting.
button for 5 seconds, display show "F0", then press
button to save setting, or wait 15 seconds to save
button to save setting, or wait 15
or
button to set timer.
button to turn on
button to close open
. The icon "F0" disappears
button

Publicité

loading

Ce manuel est également adapté pour:

Panel glass 1500Panel glass 2000