Publicité
PRODUCT USE
Magnetic emergency stop system
The product is equipped with a "magnetic emergency stop system". This safety strap must
be attached to the console for it to work. It is designed to attach to clothing so that if you
walk off or fall off the treadmill, it will stop automatically, helping to prevent injury.
Before starting a workout, make sure the safety strap is properly attached to the console
and that the clip is securely attached to your clothing.
WARNING! If the device is switched on, but the safety strap is not connected, "- - -"
appears on the display and the device cannot be started.
Commissioning
The equipment has a computerised display that provides you with controls for the
operation of the unit, as well as information about the workout, duration, speed, distance
travelled, etc. To use the equipment:
1.
Plug the equipment into a mains socket.
2.
Turn the power switch, located on the front of the unit, to the "ON" ("I") position.
3.
Fix the safety strap to the console.
Your tape is ready!
BEWARE! Always stand on the side rails
before starting the machine. Never stand
on the belt and then start the machine.
Programs
P01
P02
P05
P06
P09
P10
power switch
P03
P04
P07
P08
P11
P12
Display
The display shows current information, such as current speed, elapsed or remaining time, calories
remaining, etc.
Safety key function
Unplug the safety key and window display "E7" the treadmill stop running, and beep alarm sound
appears, the electronic watch display 2 seconds when put on the safety key, all data zero.
16
EN - MC-160
Publicité
