Publicité
Caring for and cleaning your appliance
INTERIOR - EXTERIOR CLEANING
Unscrew the two screws on either side of the door mounts using a torx screwdriver (T20), then pull the
rail out towards you.
Remove the first glass panel: Do not soak the glass panels in water. Rinse with clean water and dry off
with a lint-free cloth.
• Reassembling the oven door glass
After cleaning, reposition all of the glass panels.
Insert the last glass panel into the stops, reposition the rail and screw it back in. Remove the plastic wedge
before closing the door. Your appliance is now ready to use again.
• Replacing the light bulb
IMPORTANT:
Make sure the appliance is disconnected from the power before replacing the bulb in order to
avoid the risk of electric shock. Change the lamp only when the appliance has cooled down.
Bulb details:
25 W, 220-240 V~, 300°C, G9 cap.
You can replace the bulb yourself. Unscrew the
view port and remove the bulb (use a rubber
glove, which will make it easier to remove). Insert
the new bulb and replace the view port. This prod-
uct contains a light source with energy rating G.
19
Publicité
