Publicité
Vacuum Sealer Use instructions
DESCRIPTION OF THE PRODUCT Fig.1
1 - Lock / Opening key
2 - Indicator light to seal
3 – Function: seals
4 – Function: delete
5 – Function: suction and seals
6 - Indicator light for suction and seal
7 - Lock
8 - Sealing Tape
9 - Removable gasket
10 - Hole for suction
11 – Cable storage space
12 - Non-slip feet
INSTRUCTIONS FOR USE
OPERATION
Before connecting the plug of the vacuum machine to the power outlet verify the correct voltage.
Place the vacuum machine on a stable and smooth surface. Fig.2
lace the bag inside the removable bottom gasket (9), under the hole for suction (10).
Always allow free and do not block the suction hole. Fig.3
Close the lid by pressing lightly to lock than press the desired function.
Press the suction and seals function (5) to suck the air (and create the vacuum) and seal the bag.
When the vacuum machine sucks air, the indicator light for suction (6) light up, when finish while the
machine vacuum seals the bag, the indicator light to seal (2) light up.
Press the function seal (3) to seal the bag without making the vacuum. The indicator light for seal
(2) light up.
Press the delete function (4) to end the selected function and modify it (that is: choose another
function).
At the end of the suction and sealing process, the lights turn off. Fig.4
Press the two locking keys (1) to release the bag.
! WARNING!
The sealing tape (8), contains a thermal conduction Teflon cable that allows to seal the bag and
prevents it from sticking to the vacuum machine, it becomes hot. Be very careful not to burn.
OPEN THE SEALED BAG
To open the sealed and / or vacuumed bag use a scissors and cut the bag along the seal area.
10
Publicité
