Honeywell Home T4 Pro Information Produit page 2

Program Schedule
You can program four time periods each day, with different
settings for weekdays and weekends. We recommend the pre-sets
(shown in the table below), since they can reduce your heating/
cooling expenses.
Wake - Set to the time you wake up and the
temperature you want during the morning, until
you leave for the day.
Away - Set to the time you leave home and the
temperature you want while you are away (usually
an energy-saving level).
Home - Set to the time you return home and the
temperature you want during the evening, until
bedtime.
Sleep - Set to the time you go to bed and the
temperature you want overnight (usually an energy-saving level).
System operation settings
1 Press the Mode button to cycle to the
next available System mode.
2 Cycle through the modes until the
required System mode is displayed
and leave it to activate.
NOTE: Available System modes vary by
model and system settings.
System modes:
‒ Auto
‒ Heat
‒ Cool
‒ Em Heat
‒ Off
Fan operation settings
1 Press the Fan button to cycle to the next
available Fan mode.
2 Cycle through the modes until the required
Fan mode is displayed and leave it to activate.
NOTE: Available Fan modes vary with system
settings.
Fan modes:
‒ Auto: Fan runs only when the heating or cooling system
is on.
‒ On: Fan is always on.
Wake
(6:00 am)
Away
(8:00 am)
Home
(6:00 pm)
Sleep
(10:00 pm)
2
Heat Cool
° °
70 78
° °
62 85
° °
70 78
° °
62 82
M38823
M36517A
M36518A