Publicité
that the other keys of the remote control also work
except
code works correctly press
on with search by pressing
Note: press
Displaying the active code
1. Press simultaneously
and release them. The led turns on steadily.
2. Press
displaying the active code as in example:
if the active code is 1203 the led light emits:
1 brief blink indicating 1
2 brief blinks indicating 2
1 long blink indicating 0
3 brief blinks indicating 3
Learning from original remote control
EASY PLUS model only
With this function you can acquire the codes from
the original remote control.
1. P
ress simultaneously and briefly
keys and release them. The led starts blinking.
2. Place the two remote controls facing each other
and keep the k
duplicated presse
Plus turns off.
3. R
elease the
The led light of Universal E
(if it does not turn steadily, repeat the procedure
starting from step 1).
4. P
ress the
apply the acquired function t
Universal E
ASY Plus resumes blinking indicating that
the remote control is ready to store the next key.
5. R
epeat the procedure starting from step 2 to
acquire all remaining
Universal EASY Plus does not become fixed, try from
step 1 again.
If you want to exit the learning mod
seconds until the led light stops blinkin
ATTENTION eep the original remote contro
some functions are only possible with i
,
and
key to go back to previuos code.
key. The led light begins to blink
ey of the remote control to be
d. The led light of Universal EASY
key of the original remote control.
key of Universal EASY Plus you want to
keys. If the led light of the
:
K
keys. If the found
key, otherwise go
key.
and
l
ASY Plus turns on steadily
o. The led light of the
e, please wait 20
g.
t.
keys
and
INFO
l,
UK
5
Publicité
