Publicité
1. Inserting batteries
Lift the cover of the battery compartment and insert
2 1,5V AAA batteries respecting +/- polarity.
Direct programming
Search the TV brand in the list that you can
launch the auto search).
1. Press simultaneously and briefly
and release them. The led turns on steadily.
the device to be programmed.
If the led light blinks three times that means that the
code was entered correctly. If the led light emits a
long blink and remains lit, then digit the code again
or enter the next code.
3. Verify that the device works correctly. If not all the
functions are there, then try with the next code or
launch the auto search.
Auto search
1. Turn on the TV device and point the
remote control to it.
2. Press simultaneously and briefly
and release them. The led turns on steadily.
3. Press the
the TV off each 4 seconds using a different code
(the led light of the remote control remains lit and
blinks each 4 seconds). As soon as the TV device
turns off, press any key of the remote control. The led
light emits a brief blink and then it remains lit again.
4. Press
on again (in some cases it is necessary to press key
1 to turn TV on). If the TV device does not turn on,
press
5. Try the other keys except
If the code you found works correctly, press key
otherwise press
search.
Note: the auto search has a variable duration. In
some cases it may last even 60 minutes.
Manual search
1. Turn on the TV and point the remote
control to it.
2. Press simultaneously and briefly
and release them. The led turns on steadily.
3. Press
tries to turn the device off with a different code. As
soon as the device to be controlled turns off, verify
4
key, the remote control tries to turn
key to verify that the TV device turns
key and try to turn the device on again.
key to go on with the auto
key. At each press the remote control
and
and
,
and
and
keys
keys
.
keys
Publicité
