ergoline EXCELLENCE 880 TURBO POWER VHP12 Instructions De Service page 94

Error code Meaning
Channel selection
Real-time clock
Parameter memory
High pressure units controller
Incorrect data transfer between tanning device and MULTIVISION box.
Incorrect data transfer between tanning device and MULTIVISION box.
Sensor missing or is not ready for operation
Sensor has to be calibrated
Correction
Check for correct seating of connections on MUL-
TIVISION box.
Check that the sensor is present and correctly
connected to the base station. Check the power
supply to the base station.
Calibrate the sensor (see tanning unit operating
instructions).
93