Maintenance; Maintenance, Overview - ergoline EXCELLENCE 880 TURBO POWER VHP12 Instructions De Service

Maintenance

Power off device and secure against being switched on again
Extreme danger!
If work is to be performed on the
devices, they must be powered off.
DANGER! That means that all live electrical lines
must be switched off.
Switching off the device alone is
insufficient, as certain points may
remain energized. Therefore, switch
04049 / 0
off fuses before performing any work
and – if possible – remove them.
Extreme danger!
Severe accidents can occur if the device is mistakenly
switched on again.
Immediately after powering off, secure all switches or
DANGER!
fuses used for supplying power against being switched
on again.
• In case of circuit breakers which cannot be
screwed out, a strip of adhesive tape may be
applied over the actuation lever with the wording
"Do not switch, danger!".
01510 / 1
A prohibition sign with the text:
• "Work in progress!"
• "Place: .............................."
• "Sign may only be removed by: ............"
must always be securely mounted immediately.
01511 / 1
Extreme danger!
Prohibition signs must not be hung on or touch live parts.
DANGER!
Please open this fold-out page.
41