Remote Control - Sealy Reflexion Boost 2.0 Manuel Du Propriétaire

remote control

Remote Control arrives paired to the adjustable base.
Three (3) AAA batteries are required to operate the remote.
A) HEAD UP
button
B) HEAD DOWN
button
C) Bed FLAT
button
The Favorite 1 preset can be re-programmed to any position
chosen by the user. Simply adjust the bed to the desired position,
then hold the button down until the remote LED light flashes
twice. The button is now reprogrammed. To restore the button to
their original position, depress the One-touch Flat and Favorite 1
buttons simultaneously for 5 seconds. The remote LED light will
flash twice to indicate the original positions have been restored.
8
LED light
D) FOOT UP
button
E) FOOT DOWN
button
F) Favorite 1
Preset Position
For customer support, call Customer Service: 1-800-268-4414
ADJUST
Head Position Adjustments (A, B)
Use to raise and lower the head
section of your adjustable base.
Foot Position Adjustments (D,E)
Use to raise and lower the foot
section of your adjustable base.
Bed FLAT Button (C)
Press down and hold for three
(3) seconds to return bed to flat
position.
Favorite 1 Preset Position (F)
Reprogrammable preset position.