Sealy Reflexion Boost 2.0 Manuel Du Propriétaire page 4

safety precautions and usage statements
time period or approximately 10% duty cycle. Attempting to
circumvent or exceed this rating will shorten the life expectancy
of the product and may void the warranty.
Weight Limits:
The recommended weight limits on the Reflexion
Twin Long / Full / Queen / King: 650 pounds
Maximum weight the bed can support per person is 250 pounds
with the weight evenly distributed across the head and foot
sections. This product is not designed to support or lift this
amount of weight in the head or foot sections alone. NOTE:
Exceeding the recommended weight restrictions could damage
your Reflexion Boost 2.0 and void your warranty. For best
®
performance, you should enter and exit the Reflexion
while it is in the flat or fully lowered position.
Reflexion Boost 2.0 fits easily inside bed frames, furniture
®
beds and platform beds that are certified to hold a minimum
of 850 pounds. If using this adjustable base without the legs
and placing directly on a bed frame or platform bed, cross-bed
supports (slats) are strongly recommended to ensure Reflexion
Boost 2.0 maintains stability during operation.
Exceeding this weight restriction could damage the bed
and/or cause injury and will void the warranty.
Acoustics:
In normal base operation the wheels, which allow the bed to
maintain its distance from the wall, will make contact with the
steel platform supports of the base creating a contact noise.
When entering, exiting or shifting weight on the base, this
contact noise may be audible as the wheels make contact. This
is normal.
Fabric Care:
To prolong the life of your fabric, protect from direct sunlight
2
whenever possible. For spot cleaning, wipe area with a light
damp sponge or vacuum with a soft brush attachment to
remove particles. Keep at a minimum of 30cm (12 inches) away
from direct heat sources.
For deeper cleaning, blot liquid spills with a clean dry cloth.
Boost 2.0 are:
®
Wipe with a clean cloth dampened with warm water. Do not
wet excessively. A soft bristle brush may be used to remove
ingrained soil. Avoid scratching by gentle brushing. Wipe with a
clean cloth dampened with warm water to remove residues after
brushing. Dry in shade away from direct heat.
If persistent marks remain visible after cleaning, seek
professional advice.
Boost 2.0
®
SAVE THESE INSTRUCTIONS.
FCC Compliance:
This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may
®
not cause harmful interference and (2) this device must accept
any interference received, including interference that may
cause undesired operation.
To comply with the FCC RF exposure compliance
requirements, no change to the antenna or the device is
permitted. Any change to the antenna or the device could
result in the device exceeding the RF exposure requirements
and void user's authority to operate the device.
Radio Frequency: 2.4 GHz
CAN ICES-3 (B)/NMB-3(B)