Publicité
I max [A]
Tref [μs]
B10-A
C10-A
B16-A
C16-A
Maintenance instructions.
To assure the lighting quality of this unique LED lighting concept there are a few instructions regarding
the maintenance of this LED luminaire:
Do not touch electronic components!
Electronic components are under high voltage.
Electronic components are ESD sensitive.
During installation or when maintaining the luminaire please use static free gloves to avoid marks on the luminaire.
To remove dirt and spots use the following:
Dust: only use micro fiber cloths.
o
Fingerprints, etc.: use a cleaner for synthetic materials with antistatic properties.
o
Do not stare into the LED light beam.
To avoid scratches and dirt on optical parts remove protective foil after installation.
The luminaire shall be installed by a qualified electrician and wired in accordance with
the latest IEE electrical regulations or the national requirements.
The light source contain in this luminaire is non-user replaceable.
The driver and the light source shall only by replaced by the manufacturer or his service agent or a similar qualified person.
Driver insulation: Basic according to IEC 61847-1
I mains (A)
I max
max/2
Electrical characteristics
LED110S
4,5
1000
15
24
24
40
Inrush current
I nom
Time (us)
165S
5,1
760
10
16
16
27
6/12
200S; 220S
15,3
61
5
8
8
13
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
SENSITIVE
DEVICES
Publicité
