Publicité
BEFORE INSTALLING THE APPLIANCE
Before connec ng your appliance to the power supply, check that the voltage stated on the ra ng label
of your appliance corresponds to the voltage in your home. A di erent voltage could damage the
appliance.
The plug is the only way to unplug the appliance and should therefore be accessible at all mes. To turn
o main power to the appliance, turn it o and then detach the plug from the outlet.
The appliance must be grounded. The manufacturer is not responsible for damages that may occur as a
result of usage without grounding.
INSTALLATION
GB-10
Install the appliance in a dry,
well ventilated room. The
installation location should
neither be exposed to direct
sunlight nor near a heat
source, e.g. a cooker,
radiator, etc.
This appliance is designed to
be installed into a cabinet of
width 560mm and depth of
550 mm. The diagram shows
the appliance dimensions
and aperture required.
When pushing the appliance
into the cabinet, allow 38mm
space between the back of
the appliance and the wall.
Publicité
